MP ESD Generator Calibration set
Measurement of the Discharge Current Waveform
Short description
The MP ESD generator calibration set measuring station measures the curve shape of an ESD generator discharge current. Furthermore, transient processes in the discharge current curve shape can be measured and visualized in the frequency range up to 3 GHz. During testings, these transient processes have influence on the testing results. The scattering between different types of ESD generators can be traced back (among others) to this phenomenon.
To achieve a reproducible testing result, the discharge current curve shape, which is generated by the ESD generator and defined by the IEC 61000-4-2, should be regularly checked.
The mobile measuring station fits on the developer`s work place and can be easily installed and removed.
On request, the MP ESD generator calibration set is available in a taller work space (900 x 500 x 650) mm.
Scope of delivery
- 1x SM 02-01 SMA, Shunt
- 1x GNDA 02, Ground Adapter 32.9 mm x 32.9 mm
- 1x GND 25, Ground Plane
- 1x GP 23, Ground Plate
- 1x BZ 23-1, Shielding Material
- 1x ZG 23-1, Tent Poles
- 2x SMA-SMA 1 m ds, SMA-SMA Double-Shielded Measurement Cable
- 2x SMA-SMA 1m sm
- 1x SMA-SMA rt 0.7 m ds, SMA-SMA Measurement Cable, red
- 1x SMA-SMA bl 0.7 m ds, SMA-SMA Measurement Cable, blue
- 1x SMA-SMA ge 0.7 m ds, SMA-SMA Measurement Cable, yellow
- 1x SMA-SMA gr 0.7 m ds, SMA-SMA Measurement Cable, green
- 1x MP ESD calibration case, System Case
- 1x MP ESD calibration m, MP ESD Calibration Set User Manual
Recommended products
Technical parameters
Frequency range | 1 GHz |
Scope of delivery details
-
SM 02-01 SMA
Shunt
-
GNDA 02
Ground Adapter 32.9 mm x 32.9 mm
The GNDA ground adapter is designed for the adaption of the test board to the (100 x 100) mm recess of the GND 25 ground plane. The test board is placed into the recess of the ground adapter. According to the size of the test board there are four ground adapters to choose from (GNDA 01-04).
-
GND 25
Ground Plane
The GND 25 ground plane ensures the RF-compatible contacting of the probe during an EMC measurement at a test IC. The GND 25 consists of steel with a gold plated surface. The recess (103 mm x 103 mm) is designed for the placement of GNDA ground adapters (GNDA 01-04) and TEM cell prints (100 mm x 100 mm).
-
GP 23
Ground Plate
The GP 23 ground plate is used as reference ground plane for EMC measurements and for shielding devices under test or corresponding measuring devices. The electric connections between the ground plate and the environment are led outward via filter or RF connections to the outside. Power supply c…
-
BZ 23-1
Shielding Material
The shielding cover consists of a conductive fabric material. It is pulled over the tent poles, which are inserted into the GP 23 ground plate. Doing so a shielded room is created, which is suitable for measurements during development of electronic assemblies or larger devices. From the front, the …
-
ZG 23-1
Tent Poles
These metal tent poles are designed to be a base frame for the shielding cover and are inserted into the GP 23 ground plane. It can be easily folded and needs little space for storage.