ESA1 set

Emission Development System

The ESA1 is a system of EMC tools for measuring the interference of assemblies and devices. The CS-ESA software allows the developer to quickly and comprehensively suppress interference affecting the DUT. Interference measurements taken during the development stage with ESA1 are proportional to the …

HFW 21 set

RF Current Transformer 100 kHz up to 1 GHz

The RF-current transformer measures high-frequency currents at the DUT's lines. For reproducible measurements a metallic ground plane is needed as a reference plane. The small-scale measurement set-up at the developer's workspace allows for fast analysis of EMC measuring effects.

Z23-1 set

Shielding Tent (900 x 500x 400) mm

The Z23-1 shielding tent consits of a frame with a shielding cover and the GP 23 ground plate. It allows for shielding of the measurement set-up against external RF fields or for shielding the measuring devices, e.g. during ESD tests. From the front, the tent can be easily and quickly opened or clos…

Z23-2 set

Shielding Tent (900 x 500 x 650) mm

The Z23-2 shielding tent has a higher working space than the Z23-1 shielding tent. Therefore, larger devices under test or measuring devices can be used inside the tent. It allows for shielding of the measurement set-up against external RF fields or for shielding the measuring devices, e.g. during E…

NNB 21 set

Line Impedance Stabilisation Network

The NNB 21 line impedance stabilisation network is designed for measuring conducted disturbance emission of a device under test according to the standard CISPR 25/ISO 7637. It measures the RF interference, which couples into the vehicle electrical system. Measurements during the development in a fr…